Graphtec CE6000-40

CE6000-40 Cutter/Plotter (220v) · Cutting Blade Holder · Cutting Blade · Inspection Loupe · Separate Cutter (for Sheeting Off Jobs On Completion) · Fibre-Tipped Pen Holder · Water-Based Fibre Tipped Pen · Carrier Sheet (A3) · Roll Feeder · USB Cable: 2.9m Long · DVD-ROM · Manual


Configuration: Grit Roller With Digital Servo Drive System
Media Tracking Distance: 5m
Maximum Cutting Force: 4.41N (450gf)
Minimum Character Size: Approx. 5mm Alphanumeric (Varies Depending On Character Font & Type Of Media)
Programmable Resolution: GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Repeat-ability: Max. 0.1 mm In Plot up to 2m
Mountable Number Of Tools: 1 Tool
Blade Type: Supersteel
Pen Type: Oil-Based Ballpoint | Water-Based Fibre-Tip
Media Type: Self-Adhesive Marking Film Up To 0.25mm Thick
Perforation Cutting: Yes (Performed By Force Control)
Interface: RS-232C | USB 2.0
Buffer Memory: 2MB
The CE6000 Plus is easy to use which follows Graphtec’s ethos of ensuring all of their products are highly intuitive and simply to operate.
The plotter is driven by an large backlit LCD screen and tactile control panel which is used to quickly and easily adjust user settings, automatic registration mark sensing system and to support print and cut alignment which is crucial to ensure you achieve the best cut every time.

CE6000 Plus User Modes
Simple Mode: This mode automatically sets the necessary cutting conditions need to cut through the chosen media type which is perfect for operators who are new to the machine.

Normal Mode: This mode is user driven and lets allows the user to use all functions and settings to tune the plotter in for specific operator requirements. Using this mode allows operators to set up to 8 separate cutting conditions which can be linked to specific materials and saved within the machines memory for future use.